Source Technologies ST9917 User Manual page 28

Set up, install, and configure
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and then make sure that the guides fit snugly against
the paper.
Notes:
•
Load letterhead facedown with the header toward the front of the tray for one‑sided printing.
•
Load letterhead faceup with the header toward the back of the tray for two‑sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control panel to match the paper loaded.
27