Enabling Rip - ZyXEL Communications MS-7206 - EDITION 1 Manual

Click Advanced Application >
1
VLAN > VLAN Port Setting.
Select Slot 3 in the drop-down
2
box above the port list.
Enter 2 in the PVID field for port
3
1.
Click Apply to save your changes
4
back to the run-time memory.
Settings in the run-time memory
are lost when the MM-7201's power is turned off.

5.5 Enabling RIP

To exchange routing information with other routing devices across different
routing domains, enable RIP (Routing Information Protocol) in the RIP screen.
Click IP Application and RIP in the navigation panel.
1
Select Both in the Direction
2
field to set the switch to
broadcast and receive routing
information.
In the Version field, select
3
RIP-1 for the RIP packet
format that is universally
supported.
Click Apply to save your changes back to the run-time memory. Settings in the
4
run-time memory are lost when the MM-7201's power is turned off.
MS-7206 User's Guide
Chapter 5 Initial Setup Example
53