Static Mac Forward Setup; Chapter 14 Static Mac Forward Setup; Static Mac Forwarding - ZyXEL Communications MS-7206 - EDITION 1 Manual

Chapter 14 Static MAC Forward Setup

The following table describes the labels in this screen.
Table 22 Static MAC Forwarding
LABEL
Active
Name
MAC Address
VID
Port
Add
Cancel
Clear
Index
Active
Name
MAC Address
VID
Port
Delete
Cancel
102
DESCRIPTION
Select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by clearing this check box.
Enter a descriptive name for identification purposes for this static MAC
address forwarding rule.
Enter the MAC address in valid MAC address format, that is, six
hexadecimal character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Select the slot and enter the port where the MAC address entered in the
previous field will be automatically forwarded.
Click Add to save your rule to the switch's run-time memory. The switch
loses this rule if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to reset the fields.
Click Clear to begin configuring this screen afresh.
Click an index number to modify a static MAC address rule for a port.
This field displays whether this static MAC address forwarding rule is
active (Yes) or not (No). You may temporarily deactivate a rule without
deleting it.
This field displays the descriptive name for identification purposes for this
static MAC address-forwarding rule.
This field displays the MAC address that will be forwarded and the VLAN
identification number to which the MAC address belongs.
This field displays the ID number of the VLAN group.
This field displays the port where the MAC address shown in the next field
will be forwarded.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
MS-7206 User's Guide