Enabling Rip - ZyXEL Communications Dimension XGS-4528F User Manual

Chapter 5 Initial Setup Example

5.1.5 Enabling RIP

To exchange routing information with other routing devices across different
routing domains, enable RIP (Routing Information Protocol) in the RIP screen.
Click IP Application and RIP in the navigation panel.
1
Select Both in the Direction
2
field to set the Switch to
broadcast and receive routing
information.
In the Version field, select
3
RIP-1 for the RIP packet
format that is universally
supported.
Click Apply to save your changes back to the run-time memory. Settings in the
4
run-time memory are lost when the Switch's power is turned off.
62
EXAMPLE
XGS-4528F User's Guide