C
H A P T E R
31.1 Static Routing
Use this screen to tell the switch how to forward IP traffic when you configure the
TCP/IP parameters manually. To open this screen, click IP Application > Static
Routing.
Figure 108 Static Routing
The following table describes the related labels you use to create a static route.
Table 79 Static Routing
LABEL
Active
Name
Destination
IP Address
MS-7206 User's Guide
DESCRIPTION
Select this to activate this static route. Clear this to deactivate this static
route.
Enter a descriptive name (up to 32 printable English keyboard characters)
for identification purposes.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a route
to a single host, use a subnet mask of 255.255.255.255 in the subnet
mask field to force the network number to be identical to the host ID.
31
Static Route
241