Link Aggregation Setting - ZyXEL Communications MS-7206 - EDITION 1 Manual

screen shown next. See
aggregation.
Figure 54 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 39 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Link
Aggregation
Setting
Group ID
Active
MS-7206 User's Guide
Section 20.1 on page 135
DESCRIPTION
This is the only screen you need to configure to enable static link
aggregation.
The field identifies the link aggregation group, that is, one logical link
containing multiple ports.
Select this option to activate a trunk group.
Chapter 20 Link Aggregation
for more information on link
139