Igmp Filtering Profile - ZyXEL Communications MS-7206 - EDITION 1 Manual

Table 56 IGMP Snooping VLAN (continued)
LABEL
Add
Cancel
Clear
Index
Name
VID
Delete
Cancel

27.5 IGMP Filtering Profile

IGMP filter profiles allow you to control access to IGMP multicast groups. This
allows you to have a service available to a specific IGMP multicast group. You can
configure an IGMP filter profile for an IGMP multicast group that has access to a
service (like a SIP server for example). Within a profile, configure an IGMP filter to
specify the multicast IP address ranges. Then, assign the IGMP filter profile to the
ports (in the Multicast Setting screen) that are allowed to use the service.
To open this screen, click Advanced Application > Multicast > Multicast
Setting > IGMP Filtering Profile.
Figure 75 IGMP Filtering Profile
MS-7206 User's Guide
DESCRIPTION
Click Add to insert the entry in the summary table below and save your
changes to the switch's run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click this to clear the fields.
This is the number of the IGMP snooping VLAN entry in the table.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Check the rule(s) that you want to remove in the Delete column, then
click the Delete button.
Click Cancel to clear the Delete check boxes.
Chapter 27 Multicast
185