Syslog Setup - ZyXEL Communications MS-7206 - EDITION 1 Manual

Chapter 42 Syslog

42.2 Syslog Setup

Use this screen to configure the system logging settings. The syslog feature sends
logs to an external syslog server. To open this screen, click Management >
Syslog.
Figure 168 Syslog Setup
The following table describes the labels in this screen.
Table 117 Syslog Setup
LABEL
Syslog
Logging Type
Active
Facility
Apply
Cancel
324
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure
the syslog setting
This column displays the names of the categories of logs that the
system can generate.
Select this option to set the system to generate logs for the
corresponding category.
The log facility allows you to send logs to different files in the syslog
server. Refer to the documentation of your syslog program for more
details.
Click Apply to save your changes to the switch's run-time memory.
The switch loses these changes if it is turned off or loses power, so
use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
Click Cancel to reset the fields.
MS-7206 User's Guide