Configuring Subnet Based Vlan - ZyXEL Communications MS-7206 - EDITION 1 Manual

data for 10.1.1.0/24. The switch can then be configured to group incoming traffic
based on the source IP subnet of incoming frames.
You configure a subnet based VLAN with priority 6 and VID of 100 for traffic
received from IP subnet 172.16.1.0/24 (voice services). You also have a subnet
based VLAN with priority 5 and VID of 200 for traffic received from IP subnet
192.168.1.0/24 (video services). Lastly, you configure VLAN with priority 3 and
VID of 300 for traffic received from IP subnet 10.1.1.0/24 (data services). All
untagged incoming frames will be classified based on their source IP subnet and
prioritized accordingly. That is video services receive the highest priority and data
the lowest.
Figure 30 Subnet Based VLAN Application Example
172.16.1.0/24
VID = 100

13.8 Configuring Subnet Based VLAN

Click Subnet Based VLAN in the VLAN Port Setting screen to display the
configuration screen as shown.
MS-7206 User's Guide
Tagged Frames
Untagged
Frames
192.168.1.0/24
10.1.1.0/24
VID = 200
VID = 300
Chapter 13 VLAN
95