Hardware Monitor - ZyXEL Communications MS-7206 - EDITION 1 Manual

Table 8 System Info (continued)
LABEL
Fan Speed
(RPM)
Current
MAX
MIN
Threshold
Status

7.1.1 Hardware Monitor

Use this screen to look at more detail about a card's hardware. To open this
screen, click Basic Setting > System Info, and then click the slot number in
which the card is installed.
Figure 19 Hardware Monitor
The following table describes the labels in this screen.
Table 9 Hardware Monitor
LABEL
System Info
Slot
Temperature
Unit
MS-7206 User's Guide
DESCRIPTION
A properly functioning fan is an essential component (along with a
sufficiently ventilated, cool operating environment) in order for the system
to stay within the temperature threshold. Each fan has a sensor that is
capable of detecting and reporting if the fan speed falls below the
threshold shown.
This field displays this fan's current speed in Revolutions Per Minute (RPM).
This field displays this fan's maximum speed measured in Revolutions Per
Minute (RPM).
This field displays this fan's minimum speed measured in Revolutions Per
Minute (RPM).
This field displays the minimum speed at which a normal fan should work.
This field displays the overall status of the fan.
Normal: This fan is functioning above the minimum speed.
Error: This fan is functioning below the minimum speed.
DESCRIPTION
Click this to return to the System Info screen. See
This field displays the slot number in which the card is located.
The card has temperature sensors that are capable of detecting and
reporting if the temperature rises above the threshold. You may choose
the temperature unit (Centigrade or Fahrenheit) in this field.
Chapter 7 System Info
Figure 18 on page 61.
63