Uploading Firmware To A Cluster Member Switch - ZyXEL Communications MS-7206 - EDITION 1 Manual

Chapter 43 Cluster Management
screen, click Management > Cluster Management, and click the index number
of the cluster member.
Figure 172 Cluster Management: Cluster Member Web Configurator Screen

43.2.2 Uploading Firmware to a Cluster Member Switch

You can use FTP to upload firmware to a cluster member switch through the
cluster manager switch as shown in the following example.
Figure 173 Example: Uploading Firmware to a Cluster Member Switch
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 MM-7201 FTP version 1.0 ready at Thu Jan
User (192.168.0.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w-
-rw-rw-rw-
--w--w--w-
-> -01-23-46
-rw-rw-rw-
-> -c5-01-23-46
226 File sent OK
ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.
ftp> bin
200 Type I OK
ftp> put 370lt0.bin fw-00-a0-c5-01-23-46
200 Port command okay
150 Opening data connection for STOR fw-00-a0-c5-01-23-46
226 File received OK
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.
ftp>
330
example
1 owner group
1 owner group
1 owner group
1 owner group
1 00:58:46 1970
3042210 Jul 01 12:00 ras
393216 Jul 01 12:00 config
0 Jul 01 12:00 fw-00-a0-c5
0 Jul 01 12:00 config-00-a0
MS-7206 User's Guide