Chapter 20 Link Aggregation
• LACP only works on full-duplex links.
• All ports in the same trunk group must have the same media type, speed,
duplex mode and flow control settings.
Configure trunk groups or LACP before you connect the Ethernet switch to avoid
causing network topology loops.
20.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information
Table 36 Link Aggregation ID: Local Switch
SYSTEM
PRIORITY
0000
Table 37 Link Aggregation ID: Peer Switch
SYSTEM
PRIORITY
0000
1.
Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
136
MAC ADDRESS
KEY
00-00-00-00-00-00
0000
MAC ADDRESS
KEY
00-00-00-00-00-00
0000
1
:
PORT
PORT
PRIORITY
NUMBER
00
0000
PORT
PORT
PRIORITY
NUMBER
00
0000
MS-7206 User's Guide