Rip; Chapter 32 Rip - ZyXEL Communications MS-7206 - EDITION 1 Manual

C
H A P T E R

32.1 RIP

RIP (Routing Information Protocol) allows a routing device to exchange routing
information with other routers. Use this screen to configure RIP on the switch. To
open this screen, click IP Application > RIP. You cannot manually configure a
new entry. Each entry in the table is automatically created when you configure a
new IP domain in the IP Setup screen. See
Figure 109 RIP
The following table describes the labels in this screen.
Table 80 RIP
LABEL
Active
Index
Network
MS-7206 User's Guide
DESCRIPTION
Select this check box to enable RIP on the switch.
This field displays the index number of an IP interface.
This field displays the IP interface configured on the switch.
Refer to the section on IP Setup for more information on configuring IP
domains.
32
Section 10.2 on page 74.

RIP

243