Macintosh Configuration; Configuring Macintosh; Changing To Ethertalk - Ricoh AP2600N User Manual

5. Macintosh Configuration

Configuring Macintosh

This section describes how to configure a Macintosh computer to use EtherTalk.
The actual procedures to configure a Macintosh may differ depending on the
version of the Mac OS. The following procedure describes how to configure Mac
OS 8. If you are not using Mac OS 8, see the manual that comes with your version
of the Mac OS for more information.
Basic Procedure
Change to EtherTalk
Configure the printer
Change the printer name
Change the zone
Limitation
❒ To print from a Macintosh, use PostScript 3.

Changing to EtherTalk

Follow the procedure to configure a Macintosh computer to use EtherTalk.
Reference
For more information about installing the software required for EtherTalk,
see the Macintosh manuals.
A
Open [Control Panel], and double-click the [AppleTalk] icon.
B
From the [Connect via:] pop-up menu, select "Ethernet".
C
If you change zones, select a name from the [Current zone:] pop-up menu.
D
Close the [AppleTalk] control panels.
E
Restart the Macintosh.
71