4.3.3 LOCATIONS TO APPLY GREASE IN THE FUSING UNIT
Inside Fusing Unit
Apply Barrierta grease at the locations shown below
Location
[A]
Between fusing unit
separation cam and
pressure lever
[B]
Hot roller bushing insertion
[C]
point
[D] Inside hot roller gear
SM
Part name
CAM:ON-OFF,
COVER:LEVER:PRESSURE
GEAR:HOT ROLLER
THERMAL INSULATING
BUSHING:HOT ROLLER
GEAR:HOT ROLLER
4-19
Special Tools and Lubricants
Note
2 places.
2 places (both sides
of hot roller bushing).
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1