Netware 3.X - Advanced Settings - Ricoh AP2600N User Manual

NetWare Configuration

NetWare 3.x - Advanced Settings

The actual procedures for configuring the printer differ depending on whether
the Network Interface Board is configured as a print server or as a remote print-
er. This section describes how to configure it in the NetWare 3.x environment.
Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the Network Interface Board
4
Configure the NetWare
Turn the power
off and on
Preparation
The following procedures use the Property Sheet method in configuring the
Network Interface Board. If you configure the Network Interface Board as a
NetWare print server for the first time, we recommend you use the Wizard
method. ⇒ P.51 "Quick Setup Using the NIB Setup Tool Wizard"
Note
❒ This section assumes NetWare is functional and that the necessary environ-
ment for the NetWare Print Service is available.
54
Remote Printer
Start the print server