Using Ip Peer-To-Peer; Installing Ip Peer-To-Peer - Ricoh fax3310l Basic Features

Using IP Peer-to-Peer

Important
❒ The TCP/IP protocol is required for IP Peer-to-Peer printing. Confirm that
the TCP/IP protocol is installed, if not, install it before starting the following
procedure.

Installing IP Peer-to-Peer

Follow these steps to install IP Peer-to-Peer.
Important
❒ Confirm that the printer power is turned on before starting the following pro-
cedure.
A
Configure the IP parameters on the Network Interface Board using the op-
eration panel.
Reference
For more information about setting IP parameters, see "Configuring the
printer for the Network with the Operation Panel" in "Printer Reference 1".
B
Insert the CD-ROM labeled "Print Server Software and Documentation"
into the CD-ROM drive.
The main screen appears.
C
Click [Install/Configuration Utilities].
The "Installation/Configuration Utilities" page appears.
D
Click [Windows IP Peer-to-Peer Printing].
The "Windows IP Peer-to-Peer Printing" page appears.
This page describes the functions of this utility.
E
At the bottom of the page, click the blue word [Install IP-P2P...] to begin in-
stalling.
F
The [Welcome] dialog box appears.
G
Click [Next].
The [Installation Notes] dialog box appears.
H
Click [Yes].
The [Choose Destination Directory] dialog box appears.
I
Click [Browse] to set a different folder.
The default installation folder is C:\PROGRAM FILES\IP-P2P.
Using IP Peer-to-Peer
2
9