Ricoh fax3310l Basic Features page 442

5.2 Windows IP Peer-to-Peer Printing
— Name
— Port Number
— Description
4. When you have entered all the information, click Add.
The printer is listed in the Available Printers field at the bottom of the screen.
Highlight the printer you have just added and click the S flag for this printer.
5.
Using the Add Printers Wizard:
1. Choose Start -> Settings -> Printers.
Click Add Printer.
2.
The Add Printer wizard appears. Click Next to proceed.
3. Choose the Local Printer option and click Next.
Select the make and model of the printer you want to use and click Next.
4.
A list of printer ports appears. Any IP peer-to-peer printers that have been selected
from IP-P2P Setup appear in this list.
Select the IP printer you want to use.
5.
6. Complete the remainder of the printer setup procedure normally.
To change the printer port:
1. Right-click the printer icon.
Choose Properties and then choose the Details tab (it can take up to 15 seconds
2.
to access).
3. Select the printer address you want to use from the Print to the Following Port
list. (In Windows NT and Windows 2000, you must first deselect the previous
printer port.)
Click OK.
4.
5-12
Assign a name to identify the printer you want to add.
Enter the port number of the printer. Default is 10001.
Use this field to describe the printer's physical location, the users who can ac-
cess the printer, or other convenient description information.
Windows Peer-to-Peer Printing