Entering Print Server Settings - Ricoh fax3310l Basic Features

Primary File
Server

4.6.4 Entering Print Server Settings

NWSetup also lets you set up each print server and queue. This information is usually
entered using NWADMIN or PCONSOLE. NWSetup eliminates the need for configuring
the file server with any NetWare utility.
The following table contains a description of the NWSetup dialog box options.
Dialog Box Option
Enable Printer
Printer
Queues Serviced by
printer-name
NetWare Configuration
4.6 Configuring NetWare and Print Servers Using NWSetup
Specifies the NetWare file server that the Network Interface
Board uses as the primary file server. If no primary file server
has been selected yet, or if an unavailable server is selected,
the first file server in the list is selected.
Indicates whether support for the Network Interface Board
and printer is enabled.
• If this box is checked, then the printer is enabled.
• If the box is not checked, then the printer is not enabled.
and the remaining fields on the screen are disabled.
Displays the name of the printer. This is a read-only field.
Lists all the queues that are to be serviced by the printer.
• Queues associated with bindery connections are listed in
the format bindery server name: queue name.
• Queues associated with NDS connections are listed by
their distinguished names.
For example: If a printer services a queue named
on a bindery server named
YOURPTR_Q
queue is named
OLD_SERVER:YOURPTR_Q
server has a distinguishing name such as
ENGINEERING.CORP
ENGINGEERING_Q
as
ENGINEERING_Q.ENGINEERING.CORP
Description
and a queue named
servicing the printer, the queue is listed
, the
OLD_SERVER
. If an NDS
.
4-19