Map Requirements; Installing Map - Ricoh fax3310l Basic Features

3.2 MAP Requirements

sysadm.
3.2 MAP Requirements
To use MAP, your workstation must have the following installed:
• Microsoft TCP/IP protocol
It is not necessary for the network to support TCP/IP. However, the TCP/IP
protocol must be installed even if the network does not support it.
• A Web browser — such as Internet Explorer or Netscape Navigator
• IPX — if you want to use the IPX search functions
Both the Microsoft standard stacks and Novell 32-bit stacks are supported.

3.3 Installing MAP

You can install MAP on any workstation hard drive or network drive.
To install MAP:
Put the supplied CD-ROM into the CD drive of your workstation.
1.
2. Choose Start > Run.
3. Type the following command and click OK:
where drive is your CD drive.
Read the information in the MAP installation notes.
4.
5. At the prompt "Do you wish to install MAP?," click Yes.
Select a destination directory for the program (default is
6.
C:\Program Files\MAP
Select a program folder (default is MAP) and click Next.
7.
Note: You cannot use MAP with Windows 3.1.
3-2
drive
:\MAP\SETUP.EXE
) and click Next.
Monitoring the Network Interface Board