Windows 2000 - Ricoh fax3310l Basic Features

NetWare Configuration
K
Click the [Printer Settings] tab.
L
Clear the [Form feed] and [Enable banner] check boxes.
Note
❒ You should not select these check boxes because they should be specified
using the printer driver. If they are selected, the printer might not print
correctly.
When Using the PostScript Printer Driver
Follow these steps to set up for the PostScript Printer Driver.
A Click the [PostScript] tab.
B Click [Advanced].
C Click to clear the [Send CTRL+D before job] and [Send CTRL+D after job] check
boxes.
M
Click [OK] to close the Printer Properties.
6

Windows 2000

Follow these steps to set up a Windows 2000 client.
Preparation
Log on to the NetWare file server before starting the following procedure. To
use the NetWare server, select [Typical] installation.
A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer will start by Auto Run.
Important
❒ Never have two versions of the same printer driver installed on your sys-
tem at the same time. When upgrading to a new version of the printer driv-
er, delete the old version, and then install the new one.
Note
❒ Auto Run might not automatically work with certain OS settings. In this
case, launch "INSTTOOL.EXE" located on the CD-ROM root directory.
C
Follow the instructions on the screen.
D
Select [Typical] installation, and then click [Next].
E
Follow the instructions on the screen.
40