Selecting The Printer Port; Deleting The Port - Ricoh fax3310l Basic Features

Selecting the Printer Port

The Peer-to-peer printing software should be installed on each Windows 95/98/
Me PC that will use Peer-to-peer printing services.
A
Install the printer driver you want to use.
If the printer drivers have already been installed, you can go to the next step.
Reference
For more information about the printer drivers, see "Installing the PCL 6/5e
Printer Driver" or "Installing the PostScript Printer Driver" in "Printer Refer-
ence 1".
B
Click [Start] on the taskbar, point to [Settings], and then click [Printers].
The [Printers] window appears.
C
Click the icon of the printer you want to set for Peer-to-peer printing.
D
On the [File] menu, click [Properties].
The Printer Properties appear.
E
Click the [Details] tab.
F
From the [Print to the following port:] list box, select the port of the printer you
want to use for Peer-to-peer printing.
• Select the IP address of the printer. If you do not find the IP address of the
printer, the printer is not in your local subnet. Then you need to configure
IP Peer-to-Peer port manually as described in the "Owner's Manual" on
the CD-ROM labeled "Print Drivers and Utilities".
G
Click [OK].

Deleting the Port

The following procedure allows you to delete the printer port. If you want to delete the
port which is currently used in Windows, switch the port to another such as "FILE",
then delete it. For more information about IP Peer-to-Peer, see the "Owner's Manual".
A
Click [Start] on the taskbar, point to [Programs], and then click [IP-P2P].
The [IP-Peer to Peer Setup] window appears.
B
Click [Printers...].
C
Click [Find Printers].
Available printers appear.
D
Click to select the port you want to delete from "Unit Name" list.
E
Click [Delete].
Using IP Peer-to-Peer
11
2