Installing Smartnetmonitor For Client - Ricoh fax3310l Basic Features

Getting Ready for Software Installation
E
Remove the check mark from the [Printer Driver].
F
Click to select [Utility] and then click [Detail].
G
Click to select [SmartNetMonitor for Admin] and then click [OK].
1
H
Click [OK].
I
Follow the instructions on the screen.
After installation is completed, see P.34 "Setting Up as a Print Server" when
you use the printer as a print server.
Note
❒ If you require restarting the computer after installation of SmartNetMoni-
tor for Admin was completed, restart the computer and continue to config-
uration.

Installing SmartNetMonitor for Client

A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer will start by Auto Run.
Note
❒ Auto Run might not automatically work with certain OS settings. In this
case, launch "INSTTOOL.EXE" located on the CD-ROM root directory.
C
Follow the instructions on the screen.
D
Select "Custom" installation, and then click [Next].
E
Remove the check mark from the [Printer Driver].
F
Click to select [SmartNetMonitor for Client], and then click [OK].
G
Click [OK].
H
Follow the instructions on the screen.
Note
❒ If you are required to restart the computer after the installation of Smart-
NetMonitor for Client, restart the computer and continue with necessary
configurations.
4