Configuring Netware And Print Servers Using Nwsetup; Installing And Running Nwsetup - Ricoh fax3310l Basic Features

4.6 Configuring NetWare and Print Servers Using NWSetup

To set up a Notify list:
Log in to the file server and run PCONSOLE on that server.
1.
Choose Print Servers from the Available Options menu.
2.
Select the print server you want.
3.
4. Choose Printers from the Print Server Information window.
Select the printer you want.
5.
6. In that printer's Configuration Menu, choose Notification and press Enter.
7. Press the Insert key to get a list of available options.
The Notify Candidates screen appears.
8. Select the notification candidate you want.
The Notify Interval screen appears.
9. Specify the notify intervals you want.
The First interval is the time the network waits before it notifies users about a
print job problem. The Next interval specifies how often users are notified.
Press Esc and save all changes.
10.
4.6 Configuring NetWare and Print Servers Using NWSetup
The NWSetup program lets you set up NetWare and your network interface card (NIC)
using one program. NWSetup combines the following configuration steps:
• Setting up the Novell file servers and print servers for NetWare printing (without
using NWSetup utilities)
• Setting up your print server printers for network printing

4.6.1 Installing and Running NWSetup

Put the CD-ROM into your CD drive on your workstation.
1.
2. Choose Start -> Run.
3. Type the following command and click OK:
where drive specifies your CD drive.
4. Follow the instructions in the Setup program.
After you install NWSetup, a program icon appears in your Start menu. To start the
program, choose Start -> NWSetup -> NWSetup.
4-16
drive:\NWSETUP\SETUP.EXE
NetWare Configuration