Ricoh fax3310l Basic Features page 422

4.6 Configuring NetWare and Print Servers Using NWSetup
Print Queue Scan
Rate
Print Server
Password and
Print Server
Password Retype
Ethernet Frame
Type
Enable NDS
Mode
Preferred NDS
Context
Preferred NDS
Tree
Enable Bindery
Mode
4-18
Specifies the rate at which a Network Interface Board polls
print queues for a new print job. For example, if you put 1 in
the field, the Network Interface Board polls for new print jobs
each second.
The minimum value is 1 and the maximum is 250.
Indicates the password for a Network Interface Board used to
log in to NetWare. When you change this field, NWSetup sets
the password in both NetWare and the Network Interface
Board.
The maximum length is 32 characters.
The values in the Password and Password Retype
Note:
fields must be identical before you can choose Finish on
this screen.
Indicates the Ethernet frame type that should be used by the
NetWare protocol stack by default. Only one frame type can be
selected.
Indicates whether the Network Interface Board supports
Directory Services. When the box is checked, the Network
Interface Board supports Directory Services.
If this box is not checked, all other fields on this screen are not
enabled.
Enter a text string to set the NDS directory context that the
Network Interface Board uses to log in to the network. The
maximum length is 128 characters.
Enter a text string to set the NDS tree that the Network
Interface Board uses to log n. The maximum length is 48
characters.
Determines whether the Network Interface Board should
attempt to service the NetWare network in Bindery Mode.
If this option is not enabled, the Primary File Server option is
not enabled.
NetWare Configuration