Troubleshooting; Loading Paper In The Main Paper Tray - Ricoh fax3310l Basic Features

Loading Paper in the Main Paper Tray

If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
the paper.
Important
❒ When loading paper, be careful
not to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not outputting
a copy or received document.
Note
❒ Regarding paper types and sizes
that can be used, see p.128 "Pa-
per", <Advanced Features> .
❒ If you want to change the paper
size, see p.62 "Changing the Paper
Size Setting", <Advanced Features>
.
A A A A
Make sure that the main paper
tray is not being used.
B B B B
Pull out the main paper tray until
it stops.

4. Troubleshooting

C C C C
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the main paper
tray and you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
D D D D
Push the main paper tray in until
it stops.
69