Assigning Print Queues To The Printer - Ricoh fax3310l Basic Features

4.1 Configuring NetWare 3.x
Choose Printer 0.
4.
The Printer 0 Configuration screen appears with a title of "Printer 0."
5. To change the name that the print server uses in its messages in the Notify list to
users, select Name and enter a name.
This name helps you identify the printer — for example, LASER_PRINTER.
6. Choose Type.
A list of printer types is displayed.
In the list of printer types, choose Remote Other/Unknown.
This creates default entries in the other fields. These defaults are usually optimal,
so do not change them without specific knowledge of the effects.
Press the Esc key and save your changes. Then continue to press Esc to return to
7.
the Print Server Configuration menu. If you have finished the configuration, save
your changes and exit from PCONSOLE.

4.1.5 Assigning Print Queues to the Printer

When you assign queues to the defined printer, you authorize the print server to service
these queues.
Note: Do not assign the same queue to two different print servers. If a queue is assigned to
multiple print servers, print jobs might not go to the intended printer.
To assign print queues to the printer:
In PCONSOLE, choose Queues Serviced By Printer from the Print Server
1.
Configuration menu.
Choose the printer name from the list of defined printers.
2.
The Available Queues list for the printer is displayed.
Choose the queue you want and then assign a priority level from 1 to 10 (where 1
3.
is the highest priority. It is also the default).
The queue is displayed on the list for the printer.
You can press Enter again to assign additional queues.
When you finish assigning queues, press the Esc key and save your changes.
4.
Then continue to press Esc to return to the Print Server Configuration menu. If
you have finished the configuration, save your changes and exit from
PCONSOLE.
4-4 NetWare Configuration