Endress+Hauser Levelflex FMP56 Operating Instructions Manual page 75

Levelflex FMP56, FMP57 HART
Endress+Hauser
13.2.2 Calling up remedial measures
X X X X X X X X X
20.50
X
 40 Message for remedial measures
1 Diagnostic information
2 Short text
3 Service ID
4 Diagnostic behavior with diagnostic code
5 Operation time when error occurred
6 Remedial measures
The user is in the diagnostic message.
1. Press  ( symbol).
 The Diagnostic list submenu opens.
2. Select the desired diagnostic event with  or  and press  .
 The message for the remedial measures for the selected diagnostic event opens.
3. Press  +  simultaneously.
 The message about the remedial measures closes.
The user is in the Diagnostics menu at an entry for a diagnostics event, e.g. in Diagnostic
list or in Previous diagnostics.
1. Press .
 The message for the remedial measures for the selected diagnostic event opens.
2. Press  +  simultaneously.
 The message about the remedial measures closes.
13.3 Diagnostic event in the operating tool
If a diagnostic event has occurred in the device, the status signal appears in the top left
status area of the operating tool together with the corresponding symbol for the event
level according to NAMUR NE 107:
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
Diagnostics and troubleshooting
S
X X X X X X X X
S801
Supply voltage
XX
1.
Diagnostic list
Diagnostics 1
1
S801 Supply voltage
Diagnostics 2
Diagnostics 3
2.
Supply voltage
2
S801 0d00h02m25s
4
Increase supply voltage
6
3.
S
X
Menu
i
S
(ID:203) 3
5
A0029431-EN
75