Endress+Hauser Levelflex FMP56 Operating Instructions Manual page 160

Operating menu
Separator
Navigation
Description
Selection
Number format
Navigation
Description
Selection
Additional information
Decimal places menu
Navigation
Description
Selection
Additional information
Backlight
Navigation
Prerequisite
Description
160
 Setup → Advanced setup → Display → Separator
Select decimal separator for displaying numerical values.
• .
• ,
 Setup → Advanced setup → Display → Number format
Choose number format for the display.
• Decimal
• ft-in-1/16' '
The ft-in-1/16'' option is only valid for distance units.
 Setup → Advanced setup → Display → Dec. places menu
Select number of decimal places for the representation of numbers within the operating
menu.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
• Is only valid for numbers in the operating menu (e.g. Empty calibration, Full
calibration), but not for the measured value display. The number of decimal places for
the measured value display is defined in the Decimal places 1 to 4 parameters
• This setting does not affect the accuracy of the device for measuring or calculating the
value
 Setup → Advanced setup → Display → Backlight
The device has the SD03 local display (with optical keys).
Switch the local display backlight on and off.
Levelflex FMP56, FMP57 HART
Endress+Hauser


