Memory/Bank Scan - Icom IC-PCR1500 Instruction Manual

7
SCAN OPERATION (Multi-function receiver/Component screens only)

Memory/bank scan

This function searches all memory channels in a selected
memory bank.
D Starting a memory/bank scan
q Make sure the squelch is set to the threshold point (closed
condition).
w Click zYx(BANK) or zZx(BANK) to select the desired
memory bank.
eRight-click the zMEMOx button to call up the [Memory
Scan] setting screen if it is not displayed.
• [Receiver] screen
IC-PCR1500
zMEMOx
86
IC-PCR2500
Active band only
BANK
zYx/zZx
• [Compo] screen
IC-PCR1500 IC-PCR2500
METER/SCAN MAIN
rSelect the bank scan condition from 'Current Bank', 'Select
Bank' or 'All Bank.'
(a) 'Current Bank'
Scans memory channels within the current bank.
(b) 'Select Bank'
Scans memory channels within the selected bank ("Sel" set-
ting is turned ON).
(c) 'All Bank'
Scans memory channels within all banks.
t Make sure the check boxes are not checked ( ), then click
the close ([X]) button to close the setting screen.
q Select
No check
marks "✔"
BANK
zYx/zZx
SUB
zMEMOx
w Click