Priority Scan; (Multi Function Receiver/Component Screens Only); Priority Scan Type; Priority Scan Operation - Icom IC-PCR1500 Instruction Manual

8

PRIORITY SCAN

Priority scan type

The priority scan checks for signals on the frequency every
5 sec. while operating on a scanning memory channel or
scanning.
The scan resumes according to the selected scan resume
condition. See p. 90 for details.
NOTE: If the pocket beep function is activated, the receiver
automatically selects the tone squelch function when pri-
ority scan starts.
MEMORY CHANNEL SCAN
While operating on a frequency,
priority scan checks for a signal
on the selected memory channel
every 2 to 60 sec.
• A memory channel with skip infor-
mation can be scanned.
92
(Multi-function receiver/Component screens only)
5 sec.
Priority
Scanning
setting
memory
memory
channel
channel

Priority scan operation

qSet the receive frequency. (p. 48)
wRight-click the zPRIOx button to call up the [Priority Scan]
setting screen if it is not displayed.
• [Receiver] screen
IC-PCR1500 IC-PCR2500
Active band only
• [Compo] screen
IC-PCR1500 IC-PCR2500
METER/SCAN MAIN
• [Priority Scan] screen
w Select a memory channel.
q Select a memory bank.
zPRIOx
SUB
zPRIOx
t Click
e Set the scanning
interval
r Click