I Memory Bank Selection; I Memory Bank Setting - Icom IC-R1500 Instruction Manual

I Memory bank selection

The IC-R1500 has a total of 26 banks (A to Z). Regular mem-
ory channels, 1 to 1000, are assigned into the desired bank
for easy memory management.
qPush [MR•SKIP] several times to select memory mode, if
desired.
w Push [TS•MODE] to select memory bank condition.
• Bank's initial blinks
e Rotate [DIAL] to select the desired bank, A to P.
• Banks that have no programmed contents are skipped.
r Push [TS•MODE] to set the bank.
• Bank's initial stops blinking.
t Rotate [DIAL] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
yTo return to regular memory condition, push [MR•SKIP]
twice.
MEMORY OPERATION

I Memory bank setting

q Select the desired memory channel.
➥ Push [MR•SKIP] several times to select memory mode,
then rotate [DIAL] to select the desired memory chan-
nel.
• "!" and memory channel number blink.
w Push [SET•LOCK] to enter set mode.
ePush [SET•LOCK] or [S.MW•MW] several times until
"bAk" appears.
rRotate [DIAL] to select the desired bank, A to Z.
• Banks that have no programmed contents are skipped.
t Push [TS•MODE] to exit set mode.
4
1
[
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18