Tnc Connection; Dc Power Supply Connection - Icom IC-PCR1500 Instruction Manual

1
INSTALLATION

TNC connection

The IC-PCR1500/PCR2500 can receive 9600 bps packet
communication (AFSK) with the use of a TNC (not supplied).
Connect the TNC (Terminal Node Controller) as illustrated
below. (Other connections are same as page 1.)
D PACKET jack connection
PACKET
GND
2-conductor 3.5 (d) mm
( 1 ⁄ ˝)/100 kΩ
8
2
IC-PCR2500
TNC
PC

DC power supply connection

Use a 12 V DC power supply with at least 1.2 A capacity.
Make sure the ground terminal of the DC power supply is
grounded.
Connects to a 12 V DC
battery. Pay attention
to polarities. NEVER
connect to a 24 V bat-
tery. This could dam-
age the receiver.
white
to an
AC outlet
black
NOTE: Use the terminals as shown
below for the cable connections.
⊕ −
DC power
supply 12 V
R CAUTION! NEVER remove the
fuse-holders from the DC power cable.
D Fuse replacement
IC-PCR2500
OPC-254L
(optional)
Crimp
Solder
Fuses (4 A)