Icom IC-PCR1500 Instruction Manual page 82

6
MEMORY CHANNELS
D Calling up the memory channel data from
the control screen
q Click the zMemory Editx icon on the tool bar to call up the
[Memory Channel Editor] screen if it is not displayed.
w Click zYx(BANK) or zZx(BANK) to select the desired
memory bank.
e Select the desired memory channel to call up the operating
channel data on the control screen.
r Click zMWx, or right-click a cell then click [MW] in the edit
menu.
• The operating channel data is called up to the [Memory Channel
Editor] screen.
zMemory Editx
74
q Select a memory bank. w Click
w Click
D Copying a memory contents
q Click the zMemory Editx icon on the tool bar to call up the
[Memory Channel Editor] screen if it is not displayed.
w Click zYx(BANK) or zZx(BANK) to select the desired
memory bank.
e Right click any cell of the desired memory channel to be
copied, then select [Copy (Ctrl+C)] from the displayed menu.
• After selecting a cell of the desired memory channel, push [C]
key while pushing and holding the [Ctrl] key— these key actions
are the same as the mouse operation above.
r Right click any cell of the desired memory channel to be
copied to, then select [Paste (Ctrl+V)].
• After selecting a cell of the desired memory channel, push the
[V] key while pushing and holding the [Ctrl] key— these key ac-
tions are the same as the mouse operation above.
q Select a memory bank.
w Click
e Select the desired mem-
ory channel to be copied
to, then click [Paste].