Microsoft ® Windows ® 2000 - Icom IC-PCR1500 Instruction Manual

2
DRIVER INSTALLATION
Microsoft
NOTE: Driver installation with CD is required when an ad-
ditional Main unit is connected to the PC (i.e. 2 or more IC-
PCR1500 or IC-PCR2500s (same model) are connected
to the PC). In such a case, install the driver as shown
below.
q Quit all applications when Windows is running.
wConnect the Main unit to the desired PC's USB port with
the supplied USB cable.
CAUTION: Icom Inc. assumes no responsibility for the
receiver's operation resulting from the use of any other
USB cable other than the one supplied by Icom in the
original IC-PCR1500 or IC-PCR2500 package.
e Insert the CD into the appropriate CD drive.
r Turn the Main unit power ON.
• The power indicator lights.
• "Found New Hardware" appears as below.
10
® ®
Windows 2000
tThe CP2101 USB device is detected automatically, and the
"Found New Hardware Wizard" will come up as below.
Click [Next>].
ySelect "Search for a suitable driver for my device (recom-
mended)," then click [Next>].
Select
Click
Click