Receive Mode Selection - Icom IC-PCR1500 Instruction Manual

5
BASIC RECEIVE FUNCTIONS

Receive mode selection

Receive modes are determined by the physical properties of
the radio signals. The receiver has 5 receive modes: USB
LSB, CW, AM, WFM and FM modes. The mode selection is
stored independently in each memory channel.
Additionally IC-PCR2500 has DV or P25 mode when specific
optional unit UT-118 or UT-122 is installed, respectively. The
Sub band of IC-PCR2500 can select AM, FM and WFM mode
only.
Typically, AM mode is used for the AM broadcast stations
(0.495–1.620 MHz), air band (118–135.995 MHz), and short-
wave broadcasts. WFM is used for FM broadcast stations
(76–107.9 MHz).
When using zAUTO-Mx (automatic mode), a receive mode,
IF filter passband width, tuning step, etc., are selected
automatically after inputting a frequency. (p. 55)
Using [Receiver]/[Compo] screen
Click zSSBx, zCWx, zAMx, zWFMx, zFMx or zAUTO-Mx to
select the desired receive mode.
• Clicking zSSBx toggles between the USB and LSB mode.
Using [Simple] screen
Click zMODEx indication to display a mode list, then select
the desired receive mode.
54
• [Receiver] screen
IC-PCR1500
• [Compo] screen
IC-PCR1500
MODE/VOL
PANEL
• [Simple] screen
IC-PCR1500 IC-PCR2500
MAIN
Receive mode list Receive mode list
IC-PCR1500 IC-PCR2500
IC-PCR2500
Active band only
IC-PCR2500
Active band only
Mode indication
SUB