Show Auth_Diagnostics; Show Auth_Session_Statistics; To Display The Current Authentication Diagnostics For Port 16 - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual

show auth_diagnostics

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display the current authentication diagnostics for port 16:

show auth_session_statistics

Purpose
Syntax
Description
Parameters
Restrictions
radiusAuthClientUnknownTypes
radiusAuthClientPacketsDropped
CTRL+C ESC q Quit SPACE n
Used to display the current authentication diagnostics.
show auth_diagnostics {ports [<portlist>}
The show auth_diagnostics command is used to display the
current authentication diagnostics of the Switch on a per port basis.
ports <portlist> − Specifies a port or range of ports to be displayed.
None.
DES-3026:4#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
EntersConnecting
EapLogoffsWhileConnecting
EntersAuthenticating
SuccessWhileAuthenticating
TimeoutsWhileAuthenticating
FailWhileAuthenticating
ReauthsWhileAuthenticating
EapStartsWhileAuthenticating
EapLogoffWhileAuthenticating
ReauthsWhileAuthenticated
EapStartsWhileAuthenticated
EapLogoffWhileAuthenticated
BackendResponses
BackendAccessChallenges
BackendOtherRequestsToSupplicant
BackendNonNakResponsesFromSupplicant
BackendAuthSuccesses
BackendAuthFails
CTRL+C ESC q Quit SPACE n
Used to display the current authentication session statistics.
show auth_session_statistics {ports [<portlist> | all]}
The show auth_session statistics command is used to display
the current authentication session statistics of the Switch on a
per port basis.
ports <portlist> − Specifies a port or range of ports to be viewed.
all – Specifies that all ports will be viewed.
None.
0
0
Next Page Enter Next Entry
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Next Page Enter Next Entry
122
a All
a All