DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DES-3026:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-3026:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
read_view – Specifies that the SNMP group being created can
request SNMP messages.
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
write_view – Specifies that the SNMP group being created has write
privileges.
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch's SNMP
agent.
<view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that
a remote SNMP manager is allowed to access on the Switch.
Only administrator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group the new SNMP user will be
associated with.
Only administrator-level users can issue this command.
36