DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-3026:4#disable stp
Command: disable stp
Success.
DES-3026:4#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3026:4#show stp
Command: show stp
Bridge Parameters Settings
STP Status
Max Age
Hello Time
Forward Delay
Priority
STP Version
TX Hold Count
Forwarding BPDU : Enabled
Bridge Current Status
Designated Root Bridge
Root Priority
Cost to Root
Root Port
Last Topology Change
Topology Changes Count : 1
Protocol Specification
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only administrator-level users can issue this command.
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None.
None.
: Enabled
: 20
: 2
: 15
: 32768
: STP compatible
: 3
: 00-00-51-43-70-00
: 32768
: 200000
: 10
: 53sec
: 3
64