DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
DES-3026:4#enable sim
Command: enable sim
Success.
DES-3026:4#
disable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:
show sim
Purpose
Syntax
Description
Used to disable Single IP Management (SIM) on the Switch.
disable sim
This command will disable SIM globally on the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#disable sim
Command: disable sim
Success.
DES-3026:4#
Used to view the current information regarding the SIM group on
the Switch.
show sim
This command will display the current information regarding the
SIM group on the Switch, including the following:
SIM Version - Displays the current Single IP Management version
on the Switch.
Firmware Version - Displays the current Firmware version on the
Switch.
Device Name - Displays the user-defined device name on the
Switch.
MAC Address - Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or
Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the
Switch, whether it be enabled or disabled.
Role State – Displays the current role the Switch is taking, including
Commander or Member. A stand-alone switch will always have the
candidate role.
Discovery Interval - Time in seconds the Switch will send discovery
packets out over the network.
137