Show Fdb; To Display Unicast Mac Address Table - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
VLAN Name
MAC Address
Egress Ports
Mode
Total Entries
DES-3026:4#

show fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display unicast MAC address table:

: default
: 01-00-5E-00-00-00
: 1-5,26
: Static
: 1
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
71