Config Account; Show Account - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
create account
Example usage:
To create an administrator-level user account with the username "dlink".

config account

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
DES-3026:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3026:4#

show account

Purpose
Syntax
Description
Parameters
Restrictions
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
DES-3026:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3026:4#
Used to configure user accounts.
config account <username>
The config account command configures a user account that has
been created using the create account command.
<username>
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Used to display user accounts.
show account
Displays all user accounts created on the Switch. Up to 8 user
accounts can exist on the Switch at one time.
None.
None.
12