Enable Snmp Authenticate Trap; Disable Snmp Authenticate Trap - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
To prevent SNMP traps from being sent from the Switch:

enable snmp authenticate trap

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-3026:4#enable snmp authenticate trap
Command: enable snmp authenticate trap
Success.
DES-3026:4#

disable snmp authenticate trap

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:
DES-3026:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3026:4#
Used to enable SNMP authentication trap support.
enable snmp authenticate trap
This command is used to enable SNMP authentication trap
support on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable SNMP authentication trap support.
disable snmp authenticate trap
This command is used to disable SNMP authentication support on
the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#disable snmp authenticate trap
Command: disable snmp authenticate trap
Success.
DES-3026:4#
44