Save; To Disable Http - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
enable web
Restrictions
Example usage:
To enable HTTP and configure port number:
DES-3026:4#enable web 80
Command: enable web 80
Success.
DES-3026:4#
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To disable HTTP:

DES-3026:4#disable web
Command: disable web
Success.
DES-3026:4#

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
are numbered between 1 and 65535. The "well-known" port for the
Web-based management software is 80.
Only administrator-level users can issue this command.
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software on
the Switch.
None.
Only administrator-level users can issue this command.
Used to save changes in the Switch's configuration to non-volatile
RAM.
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
None.
Only administrator-level users can issue this command.
19