Enable Igmp_Snooping; Disable Igmp_Snooping; To Enable Igmp Snooping On The Switch; To Disable Igmp Snooping On The Switch - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual

enable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To enable IGMP snooping on the Switch:

DES-3026:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3026:4#

disable igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To disable IGMP snooping on the Switch:

DES-3026:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DES-3026:4#
Used to enable IGMP snooping on the Switch.
enable igmp_snooping {forward_mcrouter_only}
This command allows you to enable IGMP snooping on the Switch. If
forward_mcrouter_only is specified, the Switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the Switch forwards
all multicast traffic to any IP router.
forward_mcrouter_only − Specifies that the Switch should only forward all
multicast traffic to a multicast-enabled router. Otherwise, the Switch will
forward all multicast traffic to any IP router.
Only administrator-level users can issue this command.
Used to disable IGMP snooping on the Switch.
disable igmp_snooping
This command disables IGMP snooping on the Switch. IGMP snooping can
be disabled only if IP multicast routing is not being used. Disabling IGMP
snooping allows all IGMP and IP multicast traffic to flood within a given IP
interface.
None.
Only administrator-level users can issue this command.
102