Show Vtp - Cisco WS-C3560E-24PD-E Command Reference Manual

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

show vtp

Use the show vtp user EXEC command to display general information about the VLAN Trunking
Protocol (VTP) management domain, status, and counters.
Syntax Description counters
password
status
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(19)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vtp counters command.
the display.
Switch> show vtp counters
VTP statistics:
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted : 0
Subset advertisements transmitted
Request advertisements transmitted : 0
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
78-16405-05
show vtp {counters | password | status} [ | {begin | exclude | include} expression]
Display the VTP statistics for the switch.
Display the configured VTP password.
Display general information about the VTP management domain status.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Catalyst 3560 Switch Command Reference
show vtp
Table 2-35 describes each field in
2-543