Debug Platform Device-Manager - Cisco WS-C3560E-24PD-E Command Reference Manual

Appendix B Catalyst 3560 Switch Debug Commands

debug platform device-manager

Use the debug platform device-manager privileged EXEC command to enable debugging of the
platform-dependent device manager. Use the no form of this command to disable debugging.
Syntax Description
all
device-info
poll
port-download
trace
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug platform device-manager command is the same as the no debug platform
device-manager command.
Related Commands Command
show debugging
78-16405-05
debug platform device-manager {all | device-info | poll | port-download | trace}
no debug platform device-manager {all | device-info | poll | port-download | trace}
Display all platform device manager debug messages.
Display platform device manager device structure debug messages.
Display platform device manager 1-second poll debug messages.
Display platform device manager remote procedure call (RPC) usage debug
messages.
Trace platform device manager function entry and exit debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug platform device-manager
Catalyst 3560 Switch Command Reference
B-33