Chapter 2 Catalyst 3560 Switch Cisco Io Command - Cisco WS-C3560E-24PD-E Command Reference Manual

aaa accounting dot1x
Defaults
AAA accounting is disabled.
Command Modes Global configuration
Command History Release
12.2(20)SE
Usage Guidelines This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples
This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa new-model
Switch(config)# aaa accounting dot1x default start-stop group radius
The RADIUS authentication server must be properly configured to accept and log update or watchdog
Note
packets from the AAA client.
Related Commands Command
aaa authentication
dot1x
aaa new-model
dot1x reauthentication
dot1x timeout
reauth-period
Catalyst 3560 Switch Command Reference
2-2
Modification
This command was introduced.
Description
Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x.
Enables the AAA access control model. For syntax information, see the
Cisco IOS Security Command Reference, Release 12.2 > Authentication,
Authorization, and Accounting > Authentication Commands.
Enables or disables periodic reauthentication.
Sets the number of seconds between re-authentication attempts.
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
78-16405-05