Debug Platform Ip Dhcp - Cisco WS-C3560E-24PD-E Command Reference Manual

Appendix B Catalyst 3560 Switch Debug Commands

debug platform ip dhcp

Use the debug platform ip dhcp privileged EXEC command to debug DHCP events. Use the no form
of this command to disable debugging.
Syntax Description
all
error
event
packet
rpc
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug platform ip dhcp command is the same as the no debug platform ip dhcp command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping
binding
show debugging
78-16405-05
debug platform ip dhcp [all | error | event | packet | rpc]
no debug platform ip dhcp [all | error | event | packet | rpc]
(Optional) Display all DHCP debug messages.
(Optional) Display DHCP error debug messages.
(Optional) Display DHCP event debug messages.
(Optional) Display DHCP packet-related debug messages.
(Optional) Display DHCP remote procedure call (RPC) request debug
messages.
Modification
This command was introduced.
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug platform ip dhcp
Catalyst 3560 Switch Command Reference
B-41