Cisco WS-C3560E-24PD-E Command Reference Manual page 640

speed
Examples
This example shows how to set speed on a port to 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed 100
This example shows how to set a port to autonegotiate at only 10 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10
This example shows how to set a port to autonegotiate at only 10 or 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10 100
You can verify your settings by entering the show interfaces privileged EXEC command.
Related Commands Command
duplex
show interfaces
Catalyst 3560 Switch Command Reference
2-608
Description
Specifies the duplex mode of operation.
Displays the statistical information specific to all interfaces or to a specific
interface.
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
78-16405-05